Tuesday, July 01, 2014

blind man reading here boss

Oh My It's the Seagate that won't mount

trkof@trkof-p7-1205 ~ $ LSUSB
LSUSB: command not found
trkof@trkof-p7-1205 ~ $ lsusb
Bus 002 Device 005: ID 0bc2:3312 Seagate RSS LLC
Bus 002 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 004: ID 04f2:0841 Chicony Electronics Co., Ltd HP Multimedia Keyboard
Bus 001 Device 007: ID 1058:0820 Western Digital Technologies, Inc.
Bus 001 Device 006: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
trkof@trkof-p7-1205 ~ $ sudo fdisc -1
[sudo] password for trkof:
sudo: fdisc: command not found
trkof@trkof-p7-1205 ~ $ sudo fdisk -1
fdisk: invalid option -- '1'
Usage:
 fdisk [options]    change partition table
 fdisk [options] -l list partition table(s)
 fdisk -s      give partition size(s) in blocks

Options:
 -b             sector size (512, 1024, 2048 or 4096)
 -c[=]           compatible mode: 'dos' or 'nondos' (default)
 -h                    print this help text
 -u[=]           display units: 'cylinders' or 'sectors' (default)
 -v                    print program version
 -C           specify the number of cylinders
 -H           specify the number of heads
 -S           specify the number of sectors per track

trkof@trkof-p7-1205 ~ $ dmesg | tail
[  957.985086] scsi 9:0:0:0: Direct-Access     Seagate  Expansion Desk   0319 PQ: 0 ANSI: 6
[  957.985418] sd 9:0:0:0: Attached scsi generic sg6 type 0
[  967.829631] sd 9:0:0:0: [sdf] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[  967.830499] sd 9:0:0:0: [sdf] Write Protect is off
[  967.830505] sd 9:0:0:0: [sdf] Mode Sense: 2b 00 10 08
[  967.831373] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  967.832331] sd 9:0:0:0: [sdf] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[  967.856761]  sdf: sdf1
[  967.858107] sd 9:0:0:0: [sdf] 732566646 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[  967.887229] sd 9:0:0:0: [sdf] Attached SCSI disk
trkof@trkof-p7-1205 ~ $

MORE

Error mounting /dev/sdf1 at /media/trkof/Seagate Expansion Drive1: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdf1" "/media/trkof/Seagate Expansion Drive1"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read of MFT, mft=6 count=1 br=-1: Input/output error
Failed to open inode FILE_Bitmap: Input/output error
Failed to sync device /dev/sdf1: Input/output error
Failed to mount '/dev/sdf1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.